共计 8025 个字符，预计需要花费 21 分钟才能阅读完成。
这篇文章主要介绍了怎么恢复在全备后添加了数据文件的数据库，具有一定借鉴价值，感兴趣的朋友可以参考下，希望大家阅读完这篇文章之后大有收获，下面让丸趣 TV 小编带着大家一起了解一下。
参考
How to Recover a Database Having Added a Datafile Since Last Backup (文档 ID 29430.1)
HOW TO RECOVER A DATABASE HAVING ADDED A DATAFILE SINCE THE LAST BACKUP
-----------------------------------------------------------------------
This bulletin outlines the steps required in performing database recovery
having added a datafile to the database since the last backup was taken.
Section A is applicable to Oracle release 7.x. Section B applies only to
Oracle releases 7.3.x and above.
PLEASE READ THROUGH ALL STEPS AND WARNINGS BEFORE ATTEMPTING TO USE THIS
BULLETIN.
A. Current controlfile, backup of datafile exists (Oracle release 7.x)
===================================================================
A valid (either hot or cold) backup of the datafiles exists, except for the
datafile created since the backup was taken. The current controlfile exists.
The database is in archivelog mode (see note (c) at bottom of page).
1. Restore ONLY the datafiles (those that have been lost or damaged) from the
last hot or cold backup. The current online redo logs and control file(s)
must be intact.
2. Mount the database
3. Create a new datafile using the ALTER DATABASE CREATE DATAFILE command.
a. The datafile can be created with the same name as the original
file. For example,
SQLDBA alter database create datafile
2 /dev1/oracle/dbs/testtbs.dbf
Statement processed.
b. The datafile can be created with a different filename to the original.
This option might be chosen if the original file was lost due to disk
failure and the failed disk was still unavailable; the new file would
then be created on a different device. For example,
SQLDBA alter database create datafile
2 /dev1/oracle/dbs/testtbs.dbf
3 as
4 /dev2/oracle/dbs/testtbs.dbf
Statement processed.
The above command creates a new datafile on the dev2 device. The file
is created using information, stored in the control file, from the
original file. The command implicitly renames the filename in the
control file.
NOTE: IT IS VERY IMPORTANT TO SPECIFY THE CORRECT FILENAME WHEN
RECREATING THE LOST DATAFILE. IF YOU SPECIFY AN EXISTING
ORACLE DATAFILE, THAT DATAFILE WILL BE INITIALISED AND WILL
ITSELF REQUIRE RECOVERY.
4. Recover the database.
SQLDBA recover database
ORA-00279: Change 6677 generated at 06/03/97 15:20:24 needed for thread 1
ORA-00289: Suggestion : /dev1/oracle/dbs/arch/arch000074.arc
ORA-00280: Change 6677 for thread 1 is in sequence #74
Specify log: {=suggested | filename | AUTO | CANCEL}
At this point the recovery procedure will wait for the user to supply the
information requested regarding the name and location of the archived log
files. For example, entering AUTO directs Oracle to apply the suggested
redo log and any others that it requires to recover the datafiles.
Applying suggested logfile...
Log applied.
:
:
:
:
Media recovery complete.
5. Open the database
SQLDBA alter database open;
Statement processed.
B. Old controlfile, no backup of datafile (Oracle release 7.3.x and above)
=======================================================================
A valid (either hot or cold) backup of the datafiles exists, except for the
datafile created since the backup was taken. The controlfile is a backup from
before the creation of the new datafile. The database is in archivelog mode
(see note (c) at bottom of page).
NOTE : svrmgrl has been replaced by SQL*Plus starting from Oracle8i
So the SVRMGR prompt is than replaced by SQL
1. Restore the datafiles (those that have been lost or damaged) from the
last hot or cold backup. Also restore the old copy of the controlfile.
The current online redo logs must be intact.
2. Mount the database
3. Start media recovery, specifying backup controlfile
SVRMGR recover database using backup controlfile
ORA-00279: Change 6677 generated at 06/03/97 15:20:24 needed for thread 1
ORA-00289: Suggestion : /dev1/oracle/dbs/arch/arch000074.arc
ORA-00280: Change 6677 for thread 1 is in sequence #74
Specify log: {=suggested | filename | AUTO | CANCEL}
At this point, apply the archived logs as requested. Eventually Oracle
will encounter redo to be applied to the non-existent datafile. The
recovery session will exit with the following message, and will return
the user to the Server Manager prompt:
ORA-00283: Recovery session canceled due to errors
ORA-01244: unnamed datafile(s) added to controlfile by media recovery
ORA-01110: data file 5: /dev1/oracle/dbs/testtbs.dbf
4. Recreate the missing datafile. To do this, select the relevant filename
from v$datafile:
SVRMGR select name from v$datafile where file#=5;
NAME
-------------------------------------------------------
UNNAMED0005
Now recreate the file:
SVRMGR alter database create datafile
2 UNNAMED0005
3 as
4 /dev1/oracle/dbs/testtbs.dbf
SVRMGR recover database using backup controlfile
ORA-00279: Change 6747 generated at 09/24/97 16:57:18 needed for thread 1
ORA-00289: Suggestion : /dev1/oracle/dbs/arch/arch000079.arc
ORA-00280: Change 6747 for thread 1 is in sequence #79
Specify log: {=suggested | filename | AUTO | CANCEL}
Apply archived logs as requested. Prior to Oracle8, recovery must apply
the complete log which was current at the time of the datafile creation
(in the above example, this would be log sequence 79). A recovery to a
point in time before the end of this log would result in errors:
ORA-01196: file 1 is inconsistent due to a failed media recovery session
ORA-01110: data file 1: /dev1/oracle/dbs/systbs.dbf
If this happens, re-recover the database and ensure that the complete log
is applied (plus any further redo if required). This limitation does
not exist from Oracle 8.0+.
Eventually, Oracle will request the archived log corresponding to the
current online log. It does this because the (backup) controlfile has no
knowledge of the current log sequence. If an attempt is made to apply the
suggested log, the recovery session will exit with the following message:
ORA-00308: cannot open archived log /dev1/oracle/dbs/arch/arch000084.arc
ORA-07360: sfifi: stat error, unable to obtain information about file.
SVR4 Error: 2: No such file or directory
At this stage, simply restart the recovery session and apply the current
online log. The best way to do this is to try applying the online redo
logs one by one until Oracle completes media recovery:
SVRMGR recover database using backup controlfile
ORA-00279: Change 6763 generated at 09/24/97 16:57:59 needed for thread 1
ORA-00289: Suggestion : /dev1/oracle/dbs/arch/arch000084.arc
ORA-00280: Change 6763 for thread 1 is in sequence #84
Specify log: {=suggested | filename | AUTO | CANCEL}
/dev1/oracle/dbs/log2.dbf
Log applied.
Media recovery complete.
6. Open the database
SVRMGR alter database open resetlogs;
The resetlogs option must be chosen to resynchronize the controlfile.
NOTES:
======
a) These techniques can be used whether the database was closed either
cleanly or uncleanly (aborted).
b) If the database is recovered using an incomplete recovery technique (either
time-based, cancel-based, or change-based), and is recovered to a point in
time before the datafile was originally created, any references to that
datafile will be removed from the database when the database is opened.
Oracle handles this situation as follows:
- The alter database create datafile.... command creates a reference in
the controlfile for the datafile.
- Incomplete recovery terminates before applying redo that would create a
corresponding row for the datafile in the file$ dictionary table.
- When the database is opened, Oracle detects an inconsistency between file$
and the controlfile and resolves in favour of file$, deleting the entry
from the controlfile.
c) It may be possible to recover the datafile using this technique even if the
database is not in archivelog mode. However, this relies on the required
redo being available in the online redo logs.感谢你能够认真阅读完这篇文章，希望丸趣 TV 小编分享的“怎么恢复在全备后添加了数据文件的数据库”这篇文章对大家有帮助，同时也希望大家多多支持丸趣 TV，关注丸趣 TV 行业资讯频道，更多相关知识等着你来学习!
正文完
