共计 10722 个字符，预计需要花费 27 分钟才能阅读完成。
这篇文章给大家分享的是有关 Oracle RAC 之环境准备的示例分析的内容。丸趣 TV 小编觉得挺实用的，因此分享给大家做个参考，一起跟随丸趣 TV 小编过来看看吧。
本次安装选择 VMmare Workstation 10.0.1，创建四台虚拟机。如下：
Openfiler（openfileresa-2.99.1-x86_64）
机器名 IP 地址 openfiler.localdomain.com192.168.199.219
RAC 节点 （OracleLinux-R6-U4-Server-x86_64）
机器名 Public-IPPrivate-IPVIP11grac1192.168.199.10192.168.10.10192.168.199.2011grac2192.168.199.11192.168.10.11192.168.199.2111grac3192.168.199.12192.168.10.12192.168.199.22
三台机器都配置 /etc/hosts，内容如下
#node1
192.168.199.10 11grac1.localdomain.com 11grac1
192.168.199.20 11grac1-vip.localdomain.com 11grac1-vip
192.168.10.10 11grac1-priv.localdomain.com 11grac1-priv
#node2
192.168.199.11 11grac2.localdomain.com 11grac2
192.168.199.21 11grac2-vip.localdomain.com 11grac2-vip
192.168.10.11 11grac2-priv.localdomain.com 11grac2-priv
#node3
192.168.199.12 11grac3.localdomain.com 11grac3
192.168.199.22 11grac3-vip.localdomain.com 11grac3-vip
192.168.10.12 11grac3-priv.localdomain.com 11grac3-priv
#scanip
192.168.199.30 scan-cluster.localdomain.com scan-cluster2. 三台机器都关闭防火墙
chkconfig iptables off
service iptables stop3. 关闭 SeLinux
vi /etc/sysconfig/selinux
SELINUX=enforcing 改为 SELINUX=disabled4. 配置 DNS 服务器（在 11grac3 服务器上）
4.1 安装 rpm 包
[root@localhost Packages]# rpm -ivh bind-9.8.2-0.17.rc1.0.2.el6.x86_64.rpm
warning: bind-9.8.2-0.17.rc1.0.2.el6.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID ec551f03: NOKEY
Preparing... ########################################### [100%]
1:bind ########################################### [100%]4.2 编辑 /etc/named.conf, 替换成如下内容
options {
directory /var/named
zone . IN {
type hint;
file named.ca
zone localhost IN {
type master;
file named.loopback
zone 0.0.127.in-addr.apra IN {
type master;
file named.localhost
zone localdomain.com IN {
type master;
file localdomain.com.zone
};4.3 在 /var/named/ 目录下，新建 localdomain.com.zone 文件，内容如下
$TTL 1D
$ORIGIN localdomain.com.
@ IN SOA ns.localdomain.com. admin (
0 ; serial
1D ; refresh
1H ; retry
1W ; expire
3H ) ; minimum
IN NS ns
ns IN A 172.168.199.12
11grac3 IN A 192.168.199.12
11grac1 IN A 192.168.199.10
11grac2 IN A 192.168.199.11
scan-cluster IN A 192.168.199.304.4 启动 DNS 服务器
[root@11grac3 etc]# chkconfig named on
[root@localhost named]# service named restart
Stopping named: [ OK ]
Starting named: [ OK ]如果发生了错误，尝试执行如下命令试试
[root@localhost named]# rndc-confgen -r /dev/urandom -a
wrote key file /etc/rndc.key4.5 修改各服务器 dns 指向
[root@localhost named]# vi /etc/resolv.conf添加如下内容
search localdomain.com
nameserver 192.168.199.12注意：这样设置完 DNS 后，网络重启后就失效啦。使用如下方法
vi /etc/sysconfig/network-scripts/ifcfg-eth0
# 添加如下两行
DNS1=192.168.199.12
DOMAIN=localdomain.com重启网络，/etc/resolv.conf 中将自动完成 DNS 的设置。
4.6 验证 dns
[root@localhost named]# nslookup 11grac1
Server: 192.168.199.12
Address: 192.168.199.12#53
Name: 11grac1.localdomain.com
Address: 192.168.199.10
[root@localhost named]# nslookup 11grac2
Server: 192.168.199.12
Address: 192.168.199.12#53
Name: 11grac2.localdomain.com
Address: 192.168.199.11
[root@localhost named]# nslookup 11grac3
Server: 192.168.199.12
Address: 192.168.199.12#53
Name: 11grac3.localdomain.com
Address: 192.168.199.12
[root@localhost named]# nslookup scan-cluster
Server: 192.168.199.12
Address: 192.168.199.12#53
Name: scan-cluster.localdomain.com
Address: 192.168.199.305. 建立用户、建立目录、修改参数文件等（脚本见附件）
[root@localhost scripts]# ./1preusers.sh
[root@localhost scripts]# ./2predir.sh
[root@localhost scripts]# ./3prelimits.sh
[root@localhost scripts]# ./4prelogin.sh
[root@localhost scripts]# ./5preprofile.sh
[root@localhost scripts]# ./6presysctl.sh6. 建立 grid、oracle 用户的无密码登录
6.1 在三台机器上都执行如下命令
[root@11grac1 scripts]# su - oracle
11grac1- ssh-keygen -t rsa # 后面都直接回车
Generating public/private rsa key pair.
Enter file in which to save the key (/home/oracle/.ssh/id_rsa):
Created directory /home/oracle/.ssh .
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/oracle/.ssh/id_rsa.
Your public key has been saved in /home/oracle/.ssh/id_rsa.pub.
The key fingerprint is:
31:43:2d:7e:30:bb:c9:d9:d9:8a:01:a2:51:bc:8b:2d oracle@11grac1.localdomain.com
The key s randomart p_w_picpath is:
+--[ RSA 2048]----+
| . .. |
| o .+ . |
| . . .+= |
| . o . o+. |
| = o oS* o |
| E o * o . |
| . o . |
| . . |
| |
+-----------------+6.2 在三台机器上执行如下命令
11grac1- ssh-copy-id -i .ssh/id_rsa.pub 11grac1
The authenticity of host 11grac1 (192.168.199.10) can t be established.
RSA key fingerprint is cc:d0:c3:de:37:33:a7:cb:91:40:c5:5f:18:07:06:9f.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 11grac1,192.168.199.10 (RSA) to the list of known hosts.
oracle@11grac1 s password:
Now try logging into the machine, with ssh 11grac1 , and check in:
.ssh/authorized_keys
to make sure we haven t added extra keys that you weren t expecting.
11grac2- ssh-copy-id -i .ssh/id_rsa.pub 11grac1
The authenticity of host 11grac1 (192.168.199.10) can t be established.
RSA key fingerprint is cc:d0:c3:de:37:33:a7:cb:91:40:c5:5f:18:07:06:9f.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 11grac1,192.168.199.10 (RSA) to the list of known hosts.
oracle@11grac1 s password:
Now try logging into the machine, with ssh 11grac1 , and check in:
.ssh/authorized_keys
to make sure we haven t added extra keys that you weren t expecting.
11grac3- ssh-copy-id -i .ssh/id_rsa.pub 11grac1
The authenticity of host 11grac1 (192.168.199.10) can t be established.
RSA key fingerprint is cc:d0:c3:de:37:33:a7:cb:91:40:c5:5f:18:07:06:9f.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 11grac1,192.168.199.10 (RSA) to the list of known hosts.
oracle@11grac1 s password:
Now try logging into the machine, with ssh 11grac1 , and check in:
.ssh/authorized_keys
to make sure we haven t added extra keys that you weren t expecting.6.3 以上命令会在 11grac1 的 /home/oracle/.ssh 目录下生成 authorized_keys，将该文件 copy 到其他两机器上
11grac1- scp authorized_keys 11grac2:/home/oracle/.ssh/
11grac1- scp authorized_keys 11grac3:/home/oracle/.ssh/6.4 重复 6.1~6.3 步骤，生成 grid 用户的无密码验证。
7. 验证各节点必须直接是否能无密码登录
ssh 11grac1 date
ssh 11grac2 date
ssh 11grac3 date
ssh 11grac3-priv date
ssh 11grac2-priv date
ssh 11grac1-priv date
ssh 11grac1.localdomain.com date
ssh 11grac2.localdomain.com date
ssh 11grac3.localdomain.com date
ssh 11grac3-priv.localdomain.com date
ssh 11grac2-priv.localdomain.com date
ssh 11grac1-priv.localdomain.com date8. 挂载 iscsi 硬盘（每台机器上都执行）
8.1 查找 iscsi 硬盘
[root@11grac1 scripts]# iscsiadm -m discovery -t sendtargets -p 192.168.199.219
192.168.199.219:3260,1 iqn.2006-01.com.openfiler:fast_recover_area01
192.168.199.219:3260,1 iqn.2006-01.com.openfiler:rac_oradata01
192.168.199.219:3260,1 iqn.2006-01.com.openfiler:rac_ocrdisk03
192.168.199.219:3260,1 iqn.2006-01.com.openfiler:rac_ocrdisk02
192.168.199.219:3260,1 iqn.2006-01.com.openfiler:rac_ocrdisk018.2 设置开机自动挂载 iscsi 盘
iscsiadm -m node -T iqn.2006-01.com.openfiler:rac_oradata01 -p 192.168.199.219 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2006-01.com.openfiler:fast_recover_area01 -p 192.168.199.219 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2006-01.com.openfiler:rac_ocrdisk01 -p 192.168.199.219 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2006-01.com.openfiler:rac_ocrdisk02 -p 192.168.199.219 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2006-01.com.openfiler:rac_ocrdisk03 -p 192.168.199.219 --op update -n node.startup -v automatic9. 创建 asm 磁盘
9.1 安装 oracleasm-support、oracleasmlib（三台机器都执行）
注：因 oracle linux 已经将 oracleasm 内置到内核中了，所以无需安装 oracleasm 的 rpm 包。如果使用非 oracle Linux 操作系统。请按装 kmod-oracleasm-2.0.6.rh2-2.el6.x86_64.rpm 包。
[root@11grac2 /]# rpm -ivh oracleasm-support-2.1.8-1.el6.x86_64.rpm
warning: oracleasm-support-2.1.8-1.el6.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID ec551f03: NOKEY
Preparing... ########################################### [100%]
1:oracleasm-support ########################################### [100%]
[root@11grac2 /]# rpm -ivh oracleasmlib-2.0.4-1.el6.x86_64.rpm
warning: oracleasmlib-2.0.4-1.el6.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID ec551f03: NOKEY
Preparing... ########################################### [100%]
1:oracleasmlib ########################################### [100%][root@11grac1 Packages]# oracleasm configure -i
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on boot and what permissions it will have. The current values
will be shown in brackets ([] ). Hitting ENTER without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface []: grid
Default group to own the driver interface []: asmdba
Start Oracle ASM library driver on boot (y/n) [n]: y
Scan for Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: done9.2 将磁盘分区（只需单节点执行）
9.3 创建 asm 磁盘
[root@11grac1 ~]# ll /dev/disk/by-path/
ip-192.168.199.219:3260-iscsi-iqn.2006-01.com.openfiler:fast_recover_area01-lun-0 - ../../sde
ip-192.168.199.219:3260-iscsi-iqn.2006-01.com.openfiler:fast_recover_area01-lun-0-part1 - ../../sde1
ip-192.168.199.219:3260-iscsi-iqn.2006-01.com.openfiler:rac_ocrdisk01-lun-0 - ../../sdb
ip-192.168.199.219:3260-iscsi-iqn.2006-01.com.openfiler:rac_ocrdisk01-lun-0-part1 - ../../sdb1
ip-192.168.199.219:3260-iscsi-iqn.2006-01.com.openfiler:rac_ocrdisk02-lun-0 - ../../sdd
ip-192.168.199.219:3260-iscsi-iqn.2006-01.com.openfiler:rac_ocrdisk02-lun-0-part1 - ../../sdd1
ip-192.168.199.219:3260-iscsi-iqn.2006-01.com.openfiler:rac_ocrdisk03-lun-0 - ../../sdc
ip-192.168.199.219:3260-iscsi-iqn.2006-01.com.openfiler:rac_ocrdisk03-lun-0-part1 - ../../sdc1
ip-192.168.199.219:3260-iscsi-iqn.2006-01.com.openfiler:rac_oradata01-lun-0 - ../../sdf
ip-192.168.199.219:3260-iscsi-iqn.2006-01.com.openfiler:rac_oradata01-lun-0-part1 - ../../sdf1注意以上 iscsi 磁盘与 /dev/sd* 的对应关系。
[root@11grac1 ~]# oracleasm createdisk oradata /dev/sdf1
Writing disk header: done
Instantiating disk: done
[root@11grac1 ~]# oracleasm createdisk fra /dev/sde1
Writing disk header: done
Instantiating disk: done
[root@11grac1 ~]# oracleasm createdisk ocr01 /dev/sdb1
Writing disk header: done
Instantiating disk: done
[root@11grac1 ~]# oracleasm createdisk ocr02 /dev/sdd1
Writing disk header: done
Instantiating disk: done
[root@11grac1 ~]# oracleasm createdisk ocr03 /dev/sdc1查看磁盘
[root@11grac1 ~]# oracleasm listdisks
OCR01
OCR02
OCR03
ORADATA
[root@11grac1 ~]#在另外两台机器上执行磁盘扫描操作
[root@11grac3 ~]# oracleasm scandisks
Reloading disk partitions: done
Cleaning any stale ASM disks...
Scanning system for ASM disks...
Instantiating disk OCR01
Instantiating disk OCR03
Instantiating disk OCR02
Instantiating disk FRA
Instantiating disk ORADATA10. 禁用 ntp 时间同步服务
因为 11g Clusterware 中已经提供了时间同步服务，所以需要禁用 ntp 服务。
[root@11grac3 ~]# cd /etc/
[root@11grac3 etc]# mv ntp.conf ntp.conf.bak感谢各位的阅读！关于“Oracle RAC 之环境准备的示例分析”这篇文章就分享到这里了，希望以上内容可以对大家有一定的帮助，让大家可以学到更多知识，如果觉得文章不错，可以把它分享出去让更多的人看到吧！
正文完
